Ac1750 wireless dual band gigabit router
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
Archer C7(US)_V5_200628
|
|
Published Date: 2020-08-05
|
Language: Multi-language
|
File Size: 15.57 MB
|
|
New Features/Enhancement:
1. Update the Alexa directive;
2. Add the Amazon Wi-Fi Simple Setup function;
3. Add the IPV6 non-address function;
4. Enhance device security;
5. Optimize wireless 5G performance.
Bug fixed:
Fixed the bug the renewal time of the network is short may cause network instability.
|
|
|
Archer C7(US)_V5_190726
|
|
Published Date: 2019-08-16
|
Language: Multi-language
|
File Size: 15.60 MB
|
|
New Features/Enhancement:
1. Added OneMesh(TP-Link Mesh Technology) function;
2. Added the client name modification function;
3. Added QR code function for connecting wireless network;
4. Added Wireless Schedule function;
5. Optimized the internet detection function;
6. Improve the stability of TP-Link cloud function;
7. Improve the mechanism of Parental Controls and QoS.
Bug Fixed:
1. Fixed the bug that forgot password function in the login page can’t work normally after binding the TP-Link Cloud ID;
2. Fixed the bug that sometimes the router can’t get Internet access when use L2TP connection;
3. Fixed the bug that can’t login in the tether app when the router work on AP mode;
4. Fixed the bug that PPPoE dialing is instability under some ISP and improved the performance of the PPPoE dialing;
5. Fixed the bug that wireless device can’t automatically disconnect and reconnect after modifying the wireless settings.
Note:
1. For Archer C7(US)_V5;
2. You will lose the original configurations of Parental Controls and QoS due to mechanism improved.
|
|
|
Archer C7(US)_V5_180425
|
|
Published Date: 2018-05-18
|
Language: Multi-language
|
File Size: 15.53 MB
|
|
New Features/Enhancement
1. Improved the reliability for wireless connection on 5GHz.
|
|
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
Archer C7(US)_V2_180114
|
|
Published Date: 2018-05-14
|
Language: English
|
File Size: 10.63 MB
|
|
Bug Fixed
1. Fixed the WPA2 Security (KRACKs) Vulnerability.
2. Fixed the bug in resolving some specific domains when the router works as DNS server.New Features/Enhancement
1. Added SMBv2 support in the USB sharing.
2. Improved router’s performance on the 2.4G wireless network.
Notes:
1. For Archer C7 (US) V2.
2. Your device’s configuration may be lost after upgrading. You may need to reconfigure the device.
|
|
|
Archer C7(US)_V2_170525
|
|
Published Date: 2017-07-24
|
Language: English
|
File Size: 9.53 MB
|
|
Modifications and Bug Fixes:
Bug Fixed:
1. Fixed the router crash issue caused by Killer adapters.
2. Fixed the bug that the 5GHz Wi-Fi signal will disappear after working for a period.
3. Fixed the bug that cannot type in a VLAN ID that less than 16 under IPTV function.
4. Fixed the internet speed deceleration problem.
Notes:
1. For Archer C7(US)_V22. It is NOT suggested to upgrade firmware which is not from your local TP-Link official website. Please click here to choose the purchase location for your TP-Link device and download the most suitable firmware version.
|
|
|
Archer C7(US)_V2_160719
|
|
Published Date: 2016-07-19
|
Language: English
|
File Size: 9.53 MB
|
|
Modifications and Bug Fixes:
New Features/Enhancement:
1. Added Hide SSID option in Guest Network function.
2. Added a new detection function to avoid the conflict between DNS and LAN IP.
3. Optimized the IPv6 function.
Bug Fixed：
1. Fixed the bug that can’t detect HDD devices with large capacity.
2. Fixed the bug that can’t access to the FTP server remotely when DMZ function is enabled.
Notes:
1. For Archer C7(US) V2
2. Your device’s configuration will be lost after upgrading. However, old firmware’s configuration file cannot be imported into this new firmware.3. The US firmware was specialized for FCC certification and can’t be downgraded to other version, please click here for choosing your region and selecting the most suitable firmware version to upgrade.
|
|
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
Archer C8(US)_V4_170421
|
|
Published Date: 2017-04-21
|
Language: English, Multi-language
|
File Size: 26.51 MB
|
|
Modifications and Bug Fixes:
The first firmware released.
Notes:
1. For Archer C8(US)_V4.2. It is NOT suggested to upgrade firmware which is not from your local TP-Link official website. Please click here to choose the purchase location for your TP-Link device and download the most suitable firmware version.
|
|
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）Hoe vind ik de hardware versie van een TP-Link product?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
Archer C7(EU)_V2_180305
|
|
Publicatiedatum: 2018-06-11
|
Taal: Engels
|
Bestandsgrootte: 10.88 MB
|
|
New Features/Enhancement
1. Added SMBv2 support in the USB sharing.
2. Improved router’s performance on the 2.4G wireless network.
Bug Fixed
1. Fixed the WPA2 Security (KRACKs) Vulnerability.
2. Fixed the bug in resolving some specific domains when the router works as DNS server.
Notes:
1. For Archer C7 (EU) V2.
2. Your device’s configuration may be lost after upgrading. You may need to reconfigure the device.
|
|
|
Archer C7(EU)_V2_170803
|
|
Publicatiedatum: 2017-08-03
|
Taal: Engels
|
Bestandsgrootte: 9.78 MB
|
|
Modifications and Bug Fixes:
Bug Fixed:
1. Fixed the router crash issue caused by Killer adapters.
2. Fixed the bug that the 5GHz Wi-Fi signal will disappear after working for a period.
3. Fixed the bug that cannot type in a VLAN ID that less than 16 under IPTV function.
4. Fixed the internet speed deceleration problem.
Notes:
For Archer C7(EU)_V2.
|
|
|
Archer C7(EU)_V2_160616
|
|
Publicatiedatum: 2016-06-16
|
Taal: Engels
|
Bestandsgrootte: 9.54 MB
|
|
Modifications and Bug Fixes:
New Features/Enhancement：
1.Added 3G/4G function.
2.Added Hide SSID option in Guest Network function.
3.Added a new detection function to avoid the conflict between DNS and LAN IP.
4.Optimized the USB detection mechanism and the Media Server function.
5.Optimized the IPv6 function.
6.Optimized the UPnP function.
Bug Fixed：
1.Fixed the bug that can’t detect large capacity HDDs.
2.Fixed the bug that can’t access the FTP server remotely when enabled DMZ function.
3.Fixed the bug that it is failed to use Media Server function when ticked «Require Login» in «Sharing All» mode.
Notes:
1.For Archer C7(EU)V2.2.The EU firmware was specialized for CE certification and can’t be downgraded to other version, please click here for choosing your region and selecting the most suitable firmware version to upgrade.
3.Old firmware’s configuration file can be imported into this new firmware;
4.Your device’s configuration will be lost after upgrading, which means you need to configure your device again.
|
|
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
Archer C7(US)_V5_200628
|
|
Published Date: 2020-08-05
|
Language: Multi-language
|
File Size: 15.57 MB
|
|
New Features/Enhancement:
1. Update the Alexa directive;
2. Add the Amazon Wi-Fi Simple Setup function;
3. Add the IPV6 non-address function;
4. Enhance device security;
5. Optimize wireless 5G performance.
Bug fixed:
Fixed the bug the renewal time of the network is short may cause network instability.
|
|
|
Archer C7(US)_V5_190726
|
|
Published Date: 2019-08-16
|
Language: Multi-language
|
File Size: 15.60 MB
|
|
New Features/Enhancement:
1. Added OneMesh(TP-Link Mesh Technology) function;
2. Added the client name modification function;
3. Added QR code function for connecting wireless network;
4. Added Wireless Schedule function;
5. Optimized the internet detection function;
6. Improve the stability of TP-Link cloud function;
7. Improve the mechanism of Parental Controls and QoS.
Bug Fixed:
1. Fixed the bug that forgot password function in the login page can’t work normally after binding the TP-Link Cloud ID;
2. Fixed the bug that sometimes the router can’t get Internet access when use L2TP connection;
3. Fixed the bug that can’t login in the tether app when the router work on AP mode;
4. Fixed the bug that PPPoE dialing is instability under some ISP and improved the performance of the PPPoE dialing;
5. Fixed the bug that wireless device can’t automatically disconnect and reconnect after modifying the wireless settings.
Note:
1. For Archer C7(US)_V5;
2. You will lose the original configurations of Parental Controls and QoS due to mechanism improved.
|
|
|
Archer C7(US)_V5_180425
|
|
Published Date: 2018-05-18
|
Language: Multi-language
|
File Size: 15.53 MB
|
|
New Features/Enhancement
1. Improved the reliability for wireless connection on 5GHz.
|
|
Utility
|
|
|
Published Date: 2019-11-07
|
Language: English
|
File Size: 972.74 KB
|
| Operating System: Mac OS 10.15 |
|
|
|
Published Date: 2018-10-29
|
Language: English
|
File Size: 2.53 MB
|
| Operating System: Mac OS 10.9-10.14 |
|
|
|
Published Date: 2016-11-08
|
Language: English
|
File Size: 14.6 MB
|
| Operating System: WinXP/Vista/7/8/8.1/10 |
|
|
|
Published Date: 2013-11-25
|
Language: English
|
File Size: 10.69 MB
|
| Operating System: WinXP/2003/Vista/7/8/Mac/Linux |
|
Modifications and Bug Fixes:
- Fixed a bug:easysetupassistant cannot use if the computer language is Polish or Portuguese.
Notes:
Please run this beta utility as an administrator.Please ignore or choose «This program installed correctly» when you suffer Program Compatibility Assistant. |
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
Archer C7_V1_141204_US
|
|
Published Date: 2014-12-04
|
Language: English
|
File Size: 6.54 MB
|
|
Modifications and Bug Fixes:
- New Features/Enhancement：
- (1)Added the support of TP-LINK Tether v2.0;
- (2)Fixed the wireless compatibility issue with Apple Macbook Air, Macbook Pro, and Mac mini;
- (3)Improved the compatibility with Intel7260 series wireless adapter;
- (4)Added a new login domain “tplinkwifi.net” for we b-based management and «tplinklogin.net» is still available;
- (5)Added the support for multiplayer online gaming with XBOX;
- (7)Improved the UPNP module function;
- (8)Improved the RTSP ALG function;
- Bug Fixed：
- (1)Users cannot login by remote management in PPPoE connection;
- (2)PS3 may not detect the router as a UPnP device;
- (3)DynDNS does not update properly occasionally;
- (4)Some minor issues with IPv6;
- (5)The USB Storage is not accessible when «Access shared storage with password» is enabled;
- (6)Dyndns will display «succeed»even with the wrong username and password.
Notes:
1.For Archer C7 V1
2.If you’re in a region out of United States, please do not upgrade US firmware.Click here to choose your region for the most suitable firmware.
|
|
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
Archer C50(US)_V2_160801
|
|
Published Date: 2016-08-01
|
Language: English
|
File Size: 7.35 MB
|
|
Notes:
1. For Archer C50_V2(US).
2. The US firmware is specialized for FCC certification and can’t be downgraded to other version, please click here for choosing your region and selecting the most suitable firmware version to upgrade.
|
|
|
Archer C50(US)_V2_160612
|
|
Published Date: 2016-06-12
|
Language: English
|
File Size: 7.19 MB
|
|
Modifications and Bug Fixes:
Bug Fixes:Fixed the Wi-Fi connection issue on Amazon Kindle Fire.
|
|
|
Archer C50(US)_V2_160113
|
|
Published Date: 2016-01-13
|
Language: English
|
File Size: 7.00 MB
|
|
Modifications and Bug Fixes:
New Features/Enhancement：
Added the function to allow only single user to login.
Bug Fixed：
1.The device can’t obtain IP address from RootAP when being connected to RootAP by WDS function under some special condition.
2.The web page won’t give indication message when no USB device is detected after clicking scan button.
3.The USB LED light will keep blinking after the device is powered on if the HDD is plugged when the device is powered off.
Notes:
1.For Archer C50(US)_V2.
2.If you’re in a region out of United States, please do not upgrade US firmware.Click here to choose your region for the most suitable firmware.
|
|
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
Archer C50(US)_V5_200407
|
|
Published Date: 2020-05-27
|
Language: English
|
File Size: 7.44 MB
|
|
Modifications and Bug Fixes:
Optimized the security and change the login mode.
Notes:
For Archer C50 US V5.
|
|
|
Archer C50(US)_V5_181019
|
|
Published Date: 2018-11-29
|
Language: English
|
File Size: 7.25 MB
|
|
Modifications and Bug Fixes
First firmware released.
Notes
For Archer C50(US) V5.
|
|
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）How to find the hardware version on a TP-Link device?
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|
Archer C5_V2_160201_US
|
|
Published Date: 2016-02-01
|
Language: English
|
File Size: 10.14 MB
|
|
Modifications and Bug Fixes:
Bug Fixed：
Fixed a bug that the router cannot obtain IP settings randomly.
Notes:
1.For Archer C5(US)2.02.If you’re in a region out of United States, please do not upgrade US firmware.Click here to choose your region for the most suitable firmware.
|
|
|
Archer_C5_V2_150908_US
|
|
Published Date: 2015-09-08
|
Language: English
|
File Size: 9.74 MB
|
|
Notes:
1.For Archer C5(US)2.0
2.If you’re in a region out of United States, please do not upgrade US firmware.Click here to choose your region for the most suitable firmware.
|
|
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
