Загрузить для tl-sg108e v5

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

  • Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
  • Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. (Normally V1.x=V1)How to find the hardware version on a TP-Link device?
  • Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
  • To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
  • It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
  • Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
TL-SG108E(UN)_V5_20191021
Published Date: 2019-12-27 Language: English File Size: 428.72 KB

Modifications and Bug Fixes:
First firmware released.
Notes:
For TL-SG108E V5.0

Open Source Code For Programmers (GPL)

Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.

You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.

Aktualizacja

WAŻNE: Aby zapobiec problemom podczas aktualizacji, zapoznaj się z poniższymi punktami

  • Upewnij się, że oprogramowanie jest przeznaczone dla twojej wersji sprzętowej routera. Zainstalowanie oprogramowania dla nieprawidłowej wersji może uszkodzić urządzenie i spowodować utratę gwarancji.( V1.x=V1)
  • NIE zalecamy używania oprogramowania przeznaczonego dla innego regionu niż ten, w którym się znajdujesz. Możesz wybrać swój region tutaj.
  • NIE odłączaj urządzenia od prądu podczas trwania aktualizacji. Może to spowodować trwałe uszkodzenia.
  • NIE przeprowadzaj aktualizacji za pomocą połączenia bezprzewodowego jeżeli nie jest to konieczne.
  • Zalecamy rozłączenie połączenia z Internetem przez przeprowadzeniem aktualizacji.
  • Rozpakuj pobrany plik za pomocą programu do dekompresji, takiego jak np. 7Zip lub WinRAR.
TL-SG108E(UN)_V5_20191021
Data publikacji: 2019-12-27 Język: Angielski Rozmiar pliku: 428.72 KB

Modifications and Bug Fixes:
First firmware released.
Notes:
For TL-SG108E V5.0

Open Source Code For Programmers (GPL)

Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.

You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.

Unmanaged Pro Configuration Utility

Published Date: 2019-10-08 Language: English File Size: 55.96 MB
Operating System: Win2000/XP/2003/Vista/7/8/8.1/10

Enhancement:
Optimized the system compatibility  
Notes:
For TL-SG1218MPE V1, TL-SG105E(UN)_V1/V2/V3/V4, TL-SG108E(UN)_V1/V2/V3/V4, TL-SG108PE(UN)_V1/V2, TL-SG1016PE_V1, TL-SG1016DE_V1/V2/V3, TL-SG1024DE_V1/V2/V3.

Published Date: 2019-10-07 Language: English File Size: 55.96 MB
Operating System: Win2000/XP/2003/Vista/7/8/8.1/10

Notes:
For TL-SG1218MPE V1, TL-SG105E(UN)_V1/V2/V3/V4, TL-SG108E(UN)_V1/V2/V3/V4, TL-SG108PE(UN)_V1/V2, TL-SG1016PE_V1, TL-SG1016DE_V1/V2/V3, TL-SG1024DE_V1/V2/V3.

Published Date: 2018-08-08 Language: English File Size: 55.97 MB
Operating System: Win2000/XP/2003/Vista/7/8/8.1/10

New Features/Enhancement:
1.Add timeout mechanism.
2.Add DHCP Fallback mechanism.
2.Save configuration automatically when click apply.
3.Loop Prevention, IGMP Snooping, 802.1p /DSCP QoS functions are enabled by default.Notes:
1.The above optimization 2/3/4 only works for TL-SG105E(UN)4.0, TL-SG108E(UN)4.0, TL-SG108PE(UN)2.0, TL-SG1016PE(UN)1.0, TL-SG1016DE(UN)3.0, TL-SG1024DE(UN)3.0.
2.For TL-SG105E(UN)_V1/V2/V3/V4, TL-SG108E(UN)_V1/V2/V3/V4, TL-SG108PE(UN)_V1/V2, TL-SG1016PE_V1, TL-SG1016DE_V1/V2/V3, TL-SG1024DE_V1/V2/V3.

Easy Smart Configuration Utility

Published Date: 2019-12-31 Language: English File Size: 56.01 MB
Operating System: Win2000/XP/2003/Vista/7/8/8.1/10

New Features/Enhancements:
1. Add the notice that needs to change the password when login the switch for the first time.
2. Optimize the password character set to support more characters.
3. Optimize the port mirror feature to cannot set the member of LAG port to be mirrored port.

Notes:
For TL-SG1218MPE(UN) V1, TL-SG105E(UN)_V1/V2/V3/V4/V5, TL-SG108E(UN)_V1/V2/V3/V4/V5, TL-SG108PE(UN)_V1/V2, TL-SG1016PE(UN)_V1/V2, TL-SG1016DE(UN)_V1/V2/V3/V4, TL-SG1024DE(UN)_V1/V2/V3/V4, TL-SG116E(UN) V1/V1.2.

Published Date: 2018-08-08 Language: English File Size: 55.98 MB
Operating System: Win2000/XP/2003/Vista/7/8/8.1/10

New Features/Enhancement:
1.Add timeout mechanism.
2.Add DHCP Fallback mechanism.
2.Save configuration automatically when click apply.
3.Loop Prevention, IGMP Snooping, 802.1p /DSCP QoS functions are enabled by default.Notes:
1.The above optimization 2/3/4 only works for TL-SG108PE(UN)2.0, TL-SG1016PE(UN)1.0, TL-SG1016DE(UN)3.0, TL-SG1024DE(UN)3.0.
2.For TL-SG105E(UN)_V1/V2/V3, TL-SG108E(UN)_V1/V2/V3, TL-SG108PE(UN)_V1/V2, TL-SG1016PE_V1, TL-SG1016DE_V1/V2/V3, TL-SG1024DE_V1/V2/V3.

Published Date: 2018-02-09 Language: English File Size: 55.95 MB
Operating System: Win2000/XP/2003/Vista/7/8/8.1/10

Bug Fixes:
1. Fix the security vulnerabilities of TL-SG108E V1 Utility.
2. Fix the bug that the ports from VLAN1 cannot be removed in the specified situation.
3. Fix the bug that the LAG entries cannot be removed  in the specified situation.
4. Fix the bug that switch cannot remember the user name and password on WIN7 or more advanced OS.
5. Fix the bug that changing the password maybe causes the software to crash on WIN8.1.

Centrum GPL

Produkty TP-LINK korzystają częściowo z oprogramowania stworzonego przez strony trzecie, w tym z kodu źródłowego oprogramowania zgodnego z licencją GNU General Public Licence (“GPL“), w wersji 1/wersji 2/wersji 3 lub licencji GNU Lesser General Public License («LGPL»). Aby korzystać z oprogramowania, musisz się zgodzić się na warunki użytkowania produktów na licencji GPL.

Aby spełnić warunki licencji GPL, firma TP-LINK, jeżeli to konieczne, wysyła pocztą kody źrółowe GPL dla konkretnych oprogramowań na płycie CD do odczytu elektronicznego lub drogą mailową. Więcej informacji można uzyskać dla określonych produktów lub oprogramowań. Poprzez Centrum GPL firma TP-LINK zapewnia możliwość bezpłatnego pobierania kodów źródłowych oprogramowań zgodnych z licencją GPL oraz stosowanych w produktach TP-LINK.

Warunki licencji GPL znajdziesz, wydrukujesz i pobierzesz tutaj.

Open Source Code For Programmers (GPL)

Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.

You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.

Unmanaged Pro Configuration Utility

Published Date: 2019-10-08 Language: English File Size: 55.96 MB
Operating System: Win2000/XP/2003/Vista/7/8/8.1/10

Enhancement:
Optimized the system compatibility  
Notes:
For TL-SG1218MPE V1, TL-SG105E(UN)_V1/V2/V3/V4, TL-SG108E(UN)_V1/V2/V3/V4, TL-SG108PE(UN)_V1/V2, TL-SG1016PE_V1, TL-SG1016DE_V1/V2/V3, TL-SG1024DE_V1/V2/V3.

Published Date: 2019-10-07 Language: English File Size: 55.96 MB
Operating System: Win2000/XP/2003/Vista/7/8/8.1/10

Notes:
For TL-SG1218MPE V1, TL-SG105E(UN)_V1/V2/V3/V4, TL-SG108E(UN)_V1/V2/V3/V4, TL-SG108PE(UN)_V1/V2, TL-SG1016PE_V1, TL-SG1016DE_V1/V2/V3, TL-SG1024DE_V1/V2/V3.

Published Date: 2018-08-08 Language: English File Size: 55.97 MB
Operating System: Win2000/XP/2003/Vista/7/8/8.1/10

New Features/Enhancement:
1.Add timeout mechanism.
2.Add DHCP Fallback mechanism.
2.Save configuration automatically when click apply.
3.Loop Prevention, IGMP Snooping, 802.1p /DSCP QoS functions are enabled by default.Notes:
1.The above optimization 2/3/4 only works for TL-SG105E(UN)4.0, TL-SG108E(UN)4.0, TL-SG108PE(UN)2.0, TL-SG1016PE(UN)1.0, TL-SG1016DE(UN)3.0, TL-SG1024DE(UN)3.0.
2.For TL-SG105E(UN)_V1/V2/V3/V4, TL-SG108E(UN)_V1/V2/V3/V4, TL-SG108PE(UN)_V1/V2, TL-SG1016PE_V1, TL-SG1016DE_V1/V2/V3, TL-SG1024DE_V1/V2/V3.

Unmanaged Pro Configuration Utility

Published Date: 2019-10-08 Language: English File Size: 55.96 MB
Operating System: Win2000/XP/2003/Vista/7/8/8.1/10

Enhancement:
Optimized the system compatibility  
Notes:
For TL-SG1218MPE V1, TL-SG105E(UN)_V1/V2/V3/V4, TL-SG108E(UN)_V1/V2/V3/V4, TL-SG108PE(UN)_V1/V2, TL-SG1016PE_V1, TL-SG1016DE_V1/V2/V3, TL-SG1024DE_V1/V2/V3.

Published Date: 2019-10-07 Language: English File Size: 55.96 MB
Operating System: Win2000/XP/2003/Vista/7/8/8.1/10

Notes:
For TL-SG1218MPE V1, TL-SG105E(UN)_V1/V2/V3/V4, TL-SG108E(UN)_V1/V2/V3/V4, TL-SG108PE(UN)_V1/V2, TL-SG1016PE_V1, TL-SG1016DE_V1/V2/V3, TL-SG1024DE_V1/V2/V3.

Open Source Code For Programmers (GPL)

Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.

You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.

Open Source Code For Programmers (GPL)

Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.

You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

  • Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
  • Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. (Normally V1.x=V1)How to find the hardware version on a TP-Link device?
  • Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
  • To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
  • It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
  • Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
TL-SG108E(UN)_V3_20171214
Published Date: 2018-01-05 Language: English File Size: 421.27 KB

Modifications and Bug Fixes:

New Features/Enhancement:
1.The port can be removed from VLAN1
2.The port of VLAN1 can choose tagged/untagged

Notes:

1. For TL-SG108E_V3
2. Your device’s configuration will not be lost after upgrading, which means you don’t need to configure your device again after upgrading.

TL-SG108E(UN)_V3_160722
Published Date: 2016-02-15 Language: English File Size: 419.57 KB

Notes:

First Released.

Утилита настройки Easy Smart

Дата публикации: 2019-12-31 Язык: Английский Размер файла: 56.01 MB
Операционная система : Win2000/XP/2003/Vista/7/8/8.1/10

Новые функции/Улучшения:
1. Добавлено уведомление о необходимости сменить пароль при первом входе в меню коммутатора.
2. Набор символов для ввода пароля теперь поддерживает больше символов.
3. Оптимизирована функция зеркалирования — отныне зеркалирование на порт LAG невозможно.

Примечания:
Для TL‑SG1218MPE(UN) V1, TL‑SG105E(UN)_V1/V2/V3/V4/V5, TL‑SG108E(UN)_V1/V2/V3/V4/V5, TL‑SG108PE(UN)_V1/V2, TL‑SG1016PE(UN)_V1/V2, TL‑SG1016DE(UN)_V1/V2/V3/V4, TL‑SG1024DE(UN)_V1/V2/V3/V4, TL‑SG116E(UN) V1/V1.2.

Дата публикации: 2019-10-08 Язык: Английский Размер файла: 55.96 MB
Операционная система : Win2000/XP/2003/Vista/7/8/8.1/10

Notes:
For TL-SG1218MPE V1, TL-SG105E(UN)_V1/V2/V3/V4, TL-SG108E(UN)_V1/V2/V3/V4, TL-SG108PE(UN)_V1/V2, TL-SG1016PE_V1, TL-SG1016DE_V1/V2/V3, TL-SG1024DE_V1/V2/V3.

Дата публикации: 2019-10-08 Язык: Английский Размер файла: 55.95 MB
Операционная система : Win2000/XP/2003/Vista/7/8/8.1/10

Enhancement:
Optimized the system compatibility  
Notes:
For TL-SG1218MPE V1, TL-SG105E(UN)_V1/V2/V3/V4, TL-SG108E(UN)_V1/V2/V3/V4, TL-SG108PE(UN)_V1/V2, TL-SG1016PE_V1, TL-SG1016DE_V1/V2/V3, TL-SG1024DE_V1/V2/V3.

Дата публикации: 2018-08-08 Язык: Английский Размер файла: 55.98 MB
Операционная система : Win2000/XP/2003/Vista/7/8/8.1/10

New Features/Enhancement:
1.Add timeout mechanism.
2.Add DHCP Fallback mechanism.
2.Save configuration automatically when click apply.
3.Loop Prevention, IGMP Snooping, 802.1p /DSCP QoS functions are enabled by default.Notes:
1.The above optimization 2/3/4 only works for TL-SG108PE(UN)2.0, TL-SG1016PE(UN)1.0, TL-SG1016DE(UN)3.0, TL-SG1024DE(UN)3.0.
2.For TL-SG105E(UN)_V1/V2/V3, TL-SG108E(UN)_V1/V2/V3, TL-SG108PE(UN)_V1/V2, TL-SG1016PE_V1, TL-SG1016DE_V1/V2/V3, TL-SG1024DE_V1/V2/V3.

Дата публикации: 2017-08-16 Язык: Английский Размер файла: 54.26MB
Операционная система : Win2000/XP/2003/Vista/7/8/8.1/10
Дата публикации: 2016-01-06 Язык: Английский Размер файла: 52.8 MB
Операционная система : WinXP/2003/Vista/7/8/8.1/10

Modifications and Bug Fixes:

Fixed the bug that the Port Based QoS cannot be configured

Notes:

For TL-SG108E_v1

Дата публикации: 2014-09-28 Язык: Английский Размер файла: 52.3M
Операционная система : WinXP/2003/Vista/7/8

Modifications and Bug Fixes:

  1. Fixed the bug that you could not manage the switch with the Utility via wireless;
  2. Optimized the display of some port status pages.

Notes:

For TL-SG108E V1

Дата публикации: 2014-06-13 Язык: Английский Размер файла:
Операционная система : WinXP/2003/Vista/7/8

Modifications and Bug Fixes:

  1. Utility updated.

Notes:

For TL-SG108E V1

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

  • Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
  • Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. (Normally V1.x=V1)How to find the hardware version on a TP-Link device?
  • Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
  • To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
  • It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
  • Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
TL-SG108E(UN)_V2_160526
Published Date: 2016-05-26 Language: English File Size: 344 KB

Modifications and Bug Fixes:

Bug Fixed:
1.Improved the performance of the IGMP Snooping function.
2.Enhanced the security of the switch.

Notes:

Notes:
1.For TL-SG108E(UN)_v2.
2.You can upgrade the firmware via the Web Interface or the LATEST Configuration Utility.
3.The settings will not lose after and the upgrading and the old configuration can be imported to the switch as well.

TL-SG108E(UN)_V2_160108
Published Date: 2016-01-08 Language: English File Size: 343 KB

Modifications and Bug Fixes:

First firmware released for TL-SG108E_v2

Notes:

 For TL-SG108E_v2

Easy Smart Configuration Utility

Published Date: 2019-12-31 Language: English File Size: 56.01 MB
Operating System: Win2000/XP/2003/Vista/7/8/8.1/10

New Features/Enhancements:
1. Add the notice that needs to change the password when login the switch for the first time.
2. Optimize the password character set to support more characters.
3. Optimize the port mirror feature to cannot set the member of LAG port to be mirrored port.

Notes:
For TL-SG1218MPE(UN) V1, TL-SG105E(UN)_V1/V2/V3/V4/V5, TL-SG108E(UN)_V1/V2/V3/V4/V5, TL-SG108PE(UN)_V1/V2, TL-SG1016PE(UN)_V1/V2, TL-SG1016DE(UN)_V1/V2/V3/V4, TL-SG1024DE(UN)_V1/V2/V3/V4, TL-SG116E(UN) V1/V1.2.

Published Date: 2019-10-08 Language: English File Size: 55.96 MB
Operating System: Win2000/XP/2003/Vista/7/8/8.1/10

Notes:
For TL-SG1218MPE V1, TL-SG105E(UN)_V1/V2/V3/V4, TL-SG108E(UN)_V1/V2/V3/V4, TL-SG108PE(UN)_V1/V2, TL-SG1016PE_V1, TL-SG1016DE_V1/V2/V3, TL-SG1024DE_V1/V2/V3.

Published Date: 2019-10-08 Language: English File Size: 55.95 MB
Operating System: Win2000/XP/2003/Vista/7/8/8.1/10

Enhancement:
Optimized the system compatibility  
Notes:
For TL-SG1218MPE V1, TL-SG105E(UN)_V1/V2/V3/V4, TL-SG108E(UN)_V1/V2/V3/V4, TL-SG108PE(UN)_V1/V2, TL-SG1016PE_V1, TL-SG1016DE_V1/V2/V3, TL-SG1024DE_V1/V2/V3.

Published Date: 2018-08-08 Language: English File Size: 55.98 MB
Operating System: Win2000/XP/2003/Vista/7/8/8.1/10

New Features/Enhancement:
1.Add timeout mechanism.
2.Add DHCP Fallback mechanism.
2.Save configuration automatically when click apply.
3.Loop Prevention, IGMP Snooping, 802.1p /DSCP QoS functions are enabled by default.Notes:
1.The above optimization 2/3/4 only works for TL-SG108PE(UN)2.0, TL-SG1016PE(UN)1.0, TL-SG1016DE(UN)3.0, TL-SG1024DE(UN)3.0.
2.For TL-SG105E(UN)_V1/V2/V3, TL-SG108E(UN)_V1/V2/V3, TL-SG108PE(UN)_V1/V2, TL-SG1016PE_V1, TL-SG1016DE_V1/V2/V3, TL-SG1024DE_V1/V2/V3.

Published Date: 2018-02-09 Language: English File Size: 55.95 MB
Operating System: Win2000/XP/2003/Vista/7/8/8.1/10

Bug Fixes:
1. Fix the security vulnerabilities of TL-SG108E V1 Utility.
2. Fix the bug that the ports from VLAN1 cannot be removed in the specified situation.
3. Fix the bug that the LAG entries cannot be removed  in the specified situation.
4. Fix the bug that switch cannot remember the user name and password on WIN7 or more advanced OS.
5. Fix the bug that changing the password maybe causes the software to crash on WIN8.1.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

  • Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
  • Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. (Normally V1.x=V1)How to find the hardware version on a TP-Link device?
  • Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
  • To avoid wireless disconnect issue during firmware upgrade process, it’s recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
  • It’s recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
  • Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
TL-SG108E(UN)_V4_20181120
Published Date: 2018-11-30 Language: English File Size: 426.49 KB

New Features/Enhancement:
1.Add DHCP Fallback mechanism.
2.Save configuration automatically when click apply.
3.Loop Prevention, IGMP Snooping, 802.1p /DSCP QoS functions are enabled by default.
Notes:
1. For TL-SG108E_V4
2. Your device’s configuration will not be lost after upgrading, which means you don’t need to configure your device again after upgrading.

TL-SG108E(UN)_V4_20180306
Published Date: 2018-05-02 Language: English File Size: 424.72 KB

Bug Fixes:
Fix the problem of being unable to log in with a password that starts with bt.Notes:
1. For TL-SG108E_V4
2. Your device’s configuration will not be lost after upgrading, which means you don’t need to configure your device again after upgrading.

TL-SG108E(UN)_V4_20171228
Published Date: 2018-05-02 Language: English File Size: 424.36 KB

First Firmware released.

Easy Smart Configuration Utility

Published Date: 2019-12-31 Language: English File Size: 56.01 MB
Operating System: Win2000/XP/2003/Vista/7/8/8.1/10

New Features/Enhancements:
1. Add the notice that needs to change the password when login the switch for the first time.
2. Optimize the password character set to support more characters.
3. Optimize the port mirror feature to cannot set the member of LAG port to be mirrored port.

Notes:
For TL-SG1218MPE(UN) V1, TL-SG105E(UN)_V1/V2/V3/V4/V5, TL-SG108E(UN)_V1/V2/V3/V4/V5, TL-SG108PE(UN)_V1/V2, TL-SG1016PE(UN)_V1/V2, TL-SG1016DE(UN)_V1/V2/V3/V4, TL-SG1024DE(UN)_V1/V2/V3/V4, TL-SG116E(UN) V1/V1.2.

Published Date: 2018-08-08 Language: English File Size: 55.98 MB
Operating System: Win2000/XP/2003/Vista/7/8/8.1/10

New Features/Enhancement:
1.Add timeout mechanism.
2.Add DHCP Fallback mechanism.
2.Save configuration automatically when click apply.
3.Loop Prevention, IGMP Snooping, 802.1p /DSCP QoS functions are enabled by default.Notes:
1.The above optimization 2/3/4 only works for TL-SG108PE(UN)2.0, TL-SG1016PE(UN)1.0, TL-SG1016DE(UN)3.0, TL-SG1024DE(UN)3.0.
2.For TL-SG105E(UN)_V1/V2/V3, TL-SG108E(UN)_V1/V2/V3, TL-SG108PE(UN)_V1/V2, TL-SG1016PE_V1, TL-SG1016DE_V1/V2/V3, TL-SG1024DE_V1/V2/V3.

Open Source Code For Programmers (GPL)

Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License («LGPL»). You may use the respective software condition to following the GPL licence terms.

You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.

The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.

Добавить комментарий

Ваш адрес email не будет опубликован. Обязательные поля помечены *