The ilo centenary

Installation Instructions

Prerequisites:

— HP Lights-Out Configuration Utility Tool requires

Microsoft .NET Framework 3.5 or above.
Microsoft .NET Framework 4.5 or above when FIPS Mode or Enforce AES/3DES Encryption is enabled in iLO 4 and iLO 5.

— This utility requires the following minimum firmware revisions:

Integrated Lights-Out 5 firmware version 1.10 or later
Integrated Lights-Out 4 firmware version 1.00 or later
Integrated Lights-Out 3 firmware version 1.00 or later

To ensure the integrity of your download, HPE recommends verifying your results with
this SHA-256 Checksum value:

7035dfb36aff4c69ed0bad76eaa97f0e13a1032d3018e5247dacd111be6ad95e

SP99166.msi

Reboot Requirement:Reboot is not required after installation for updates to take effect and hardware stability to be maintained.

Installation:

Uninstall any older version of HP Lights-Out Configuration Utility(HPQLOCFG) before installing this version of HPQLOCFG.

Create a directory on your hard-drive.

Copy this SoftPaq to the new directory.

From this new directory, run SoftPaq to extract the necessary files.

See the RIBCL scripting guidelines in the iLO Scripting and Command Line Guide.

Sample scripts may be downloaded from www.hpe.com/info/iLO, TOOLS under Resources section. Select the operating system. Download «HPE Lights-Out XML Scripting Sample for Windows» or «HPE Lights-Out XML PERL Scripting Sample for Linux».

Installation Instructions

Ac1750 wireless dual band gigabit router

Prerequisites:You should have the Microsoft Management Framework 3.0 (which includes PowerShell 3.0) or Microsoft Management Framework 4.0 (which includes PowerShell 4.0) installed prior to installing the HP OA Cmdlets. This also requires you to first install .NET 4.0 for PowerShell 3.0 or .NET 4.5 for PowerShell 4.0. Install links to these are below.

.Net 4.0
Microsoft Management Framework 3.0
.Net 4.5
Microsoft Management Framework 4.0

To ensure the integrity of your download, HPE recommends verifying your results with
this SHA-256 Checksum value:

d7b190bed8aa4982e4aeefe60073212662e54993c0cd724c9f128bf4c4558eec

HPiLOCmdlets-x64.exe

Reboot Requirement:Reboot is not required after installation for updates to take effect and hardware stability to be maintained.

Installation:

Download the software component (HPiLOCmdlets-x64.exe is a self-extracting zip file) and run it.
Unzip the software to a directory on your hard drive (the suggested one is C:\HPiLOCmdlets).
From that drive and directory, double click the unzipped file (HPiLOCmdlets-x64.msi) to install the software
Click the Install button to proceed with the installation.

Note:

The installer should be run from an account with administrative privilege
You may have to change the execution policy for PowerShell. Get the following help to get more information in order to decide what to select — «help about_Execution_Policies». You can use the following PowerShell command until you decide it fits your needs or not:

«Set-ExecutionPolicy -Scope CurrentUser -ExecutionPolicy RemoteSigned»

Fixes

Nano adaptador powerline av500

Upgrade Requirement:Recommended — HP recommends users update to this version at their earliest convenience.

Session key is visible during Remote Console session initialization.
Customizing regional options can cause the application to stop working.
Application times out during video recording.
Startup and Pre-failure videos show no video in some instances.
Mounting a USB key that is labeled as “F:” drive causes the application to stop working.
High memory usage when virtual media runs for a long time.
Virtual media may disconnect unexpectedly.
Application occasionally stops working when the Share or Acquire dialog is closed.
The application becomes unresponsive after dismounting image file while server is rebooting.
Virtual USB key is not completely disconnected when the physical USB key is unplugged.
High CPU usage when local playback is paused.

Revision History

450mbps wireless n router

Version:5.2.0 (20 Dec 2019)

Fixes

Improved error handling when username and password are not provided on the command line.
Fixed the issue of misleading error message coming up when XML headers were used in the input XML file.

Version:5.1.0 (25 Sep 2017)

Enhancements

HPQLOCFG is now signed by Hewlett Packard Enterprise.

Version:5.0.0 (12 Jul 2017)

Enhancements

iLO 5 support introduced.

Version:1.5.0 (24 Oct 2016)

Fixes

Upgrade Requirement:Recommended — HPE recommends users update to this version at their earliest convenience.

For iLO 4 Firmware version 2.30 and onwards, it is a must to upgrade to HPQLOCFG v1.50.

For iLO 4 Firmware versions below 2.30, iLO 2 and iLO 3, it is recommended to upgrade to HPQLOCFG v1.50.

This version of HPQLOCFG supports iLO 4 firmware version 2.30 onwards when FIPS Mode or Enforce AES/3DES Encryption mode is enabled.

Note: If AES/FIPS is enabled in iLO, you may need to upgrade to .NET Framework v4.5 or above to communicate with iLO. Also make sure the Operating System supports TLSv1.1 and TLSv1.2. For more information please see iLO 4 Scripting and Command Line Guide.

Version:1.4.0 (15 Jun 2015)

Fixes

HPQLOCFG gracefully displays an error message and does not close with an exception when there are duplicate keys in the substitute variable string.

Version:1.3.0 (30 Mar 2015)

Fixes

Upgrade Requirement:Recommended — HPE recommends users update to this version at their earliest convenience.

— HPQLOCFG accepts empty(NULL) values for substitute variables when used with -t option.
— In the log file HPQLOCFG reported «Script Succeded» even when the execution of script failed.

Version:1.2.0 (9 Sep 2014)

Fixes

Upgrade Requirement:Recommended — HP recommends users update to this version at their earliest convenience.

1) When running HPQLOCFG, occasionally there used to be an ERROR «Exception has been thrown by the target of an invocation». This issue is fixed in the current version.
2) During firmware update, occasionally an error was thrown with message like ‘Error:Line #5: syntax error near «RI»‘, though the firmware was updated succesfully. This issue is fixed in the current version.

Version:1.1.0 (18 Feb 2014)

Fixes

Upgrade Requirement:Recommended — HP recommends users update to this version at their earliest convenience.

RIBCL output occasionally displays an extra INFORM tag

Enhancements

Allow up to 50 substitute variables

Version:1.0.0 (23 Jul 2013)

Enhancements

Upgrade Requirement:Recommended — HP recommends users update to this version at their earliest convenience.

DHCPV6 Enhancement and IPv6 support for iLO 4 FW v1.30 and iLO 3 FW v1.60

Откройте для себя IP-адрес HP iLO

Хотите узнать, как узнать IP-адрес HP iLO на сервере HP? В этом руководстве мы покажем вам, как просмотреть конфигурацию IP-адреса HP iLO вашего HP Server DL 380.

Список оборудования:

В следующем разделе представлен список оборудования, использованного для создания этого учебника HP iLO.

Все вышеперечисленное оборудование можно найти на сайте Amazon.

HP iLO Playlist:

На этой странице мы предлагаем быстрый доступ к списку видео, связанных с HP iLO.

Playlist

Не забудьте подписаться на наш канал на YouTube FKIT.

На этой странице мы предлагаем быстрый доступ к списку учебных пособий, связанных с HP iLO.

Учебник — Восстановление пароля HP iLO с физическим доступом

Во время процесса загрузки сервера HP нажмите клавишу F9, чтобы получить доступ к системным утилитам.

Выберите опцию «Конфигурация системы».

На следующем экране выберите утилиту конфигурации iLo.

Выберите пункт «Параметры сети».

На этом экране вы увидите IP-адрес интерфейса HP iLo.

В нашем примере IP-адрес HP iLo — 192.168.3.5.

Учебник — узнайте IP-адрес HP iLO с помощью Powershell

Эта процедура покажет вам, как узнать IP-адрес HP iLo с помощью программного обеспечения Powershell.

На компьютере Windows установите программное обеспечение с именем Инструменты сценариев для Windows PowerShell (x64): командлеты iLO

После завершения установки пакета командлетов iLo откройте подсказку powershell.

Используйте следующую команду, чтобы узнать интерфейсы HP iLo, расположенные в сегменте сети 192.168.3.0/24.

Copy to Clipboard
Find-HPiLO 192.168.3.1-254
Find-HPiLO -Range “192.168.3.1,254″

Вот вывод команды:

Copy to Clipboard
Warning : It might take a while to search for all the iLOs if the
input is a very large range or iLO response is delayed.
IP : 192.168.3.2
SPN : ProLiant DL120 G7
FWRI : 1.28
PN : Integrated Lights-Out 3 (iLO 3)
HOSTNAME : ilohost3.techexpert.tips
SerialNumber: 9CU4500JM1
UUID : 30313437-3431-4336-5534-3130304A4D31
IP : 192.168.3.4
SPN : ProLiant MicroServer Gen8
FWRI : 1.20
PN : Integrated Lights-Out 4 (iLO 4)
HOSTNAME : ilohost4.techexpert.tips
SerialNumber: 6CU2111JM1
UUID: 30453436-3631-4336-5534-3130304A4D31

В нашем примере команда powershell смогла найти 2 интерфейса HP iLo в сети 192.168.3.0/24.

Учебник — узнайте IP-адрес HP iLO с помощью NMAP

Эта процедура покажет вам, как узнать IP-адрес HP iLo с помощью программного обеспечения NMAP.

На компьютере под управлением Ubuntu Linux используйте следующую команду для установки программного обеспечения NMAP.

Copy to Clipboard
apt-get update
apt-get install nmap

Используйте следующую команду, чтобы выяснить, есть ли у вас интерфейсы HP iLo в сегменте сети 192.168.3.0/24.

Copy to Clipboard
nmap -sT -p 17988 192.168.3.* | grep -A2 -B3 open

Вот вывод команды:

Copy to Clipboard
Nmap scan report for 192.168.3.2
Host is up (0.00011s latency).

PORT STATE SERVICE
17988/tcp open http

В нашем примере команда NMAP обнаружила интерфейс HP ilo, используя IP-адрес 192.168.3.2.

2020-01-17T15:32:35-03:00

Release Notes

End User License Agreements:HPE Software License Agreement v1

Upgrade Requirement:Recommended — HPE recommends users update to this version at their earliest convenience.

Important:

IPv6 network communications — Dedicated network connection only
     Supported Networking Features
                IPv6 Static Address Assignment
                IPv6 SLAAC Address Assignment
                IPv6 Static Route Assignment
                IPv6 Static Default Gateway Entry
                DHCPv6 Stateful Address Assignment
                DHCPv6 Stateless DNS, Domain Name, and NTP Configuration
                Integrated Remote Console
                OA Single Sign-On
                HP-SIM Single Sign-On
                Web Server
                SSH Server
                SNTP Client
                DDNS Client
                RIBCL over IPv6
                SNMP
                AlertMail
                Remote Syslog
                WinDBG Support
                HPONCFG/HPLOMIG over an IPv6 connection
                Scriptable Virtual Media
                CLI/RIBCL Key Import over IPv6
                Authentication using LDAP and Kerberos over IPv6
                iLO Federation
     Networking Features not supported by IPv6 in this release
                IPv6 Over Shared Network Port Connections
                IPMI
                NETBIOS-WINS
                Enterprise Secure Key Manager (ESKM) Support

Notes:

iLO 5 User Guide and Lights-Out Scripting Guide can also be found by following the links at:http://www.hpe.com/info/ilo
Select your lights-out product, then support & documents, then manuals.

Check the online help for additional information about how to use features.
Online help can be accessed from within the browser web pages by clicking the question mark in the upper right-hand corner of each page.

Installation Instructions

Prerequisites:

Hewlett Packard Enterprise recommends the following or greater versions of iLO utilities
for best performance:

RESTful Interface Tool (iLOREST) 3.0
HPQLOCFG v5.2
Lights-Out XML Scripting Sample bundle 5.20.0 or later
HPONCFG Windows 5.3.0
HPONCFG Linux 5.3.0 or later
LOCFG v5.20.0 or later
HPLOMIG 5.2.0

NOTE: Updated utilities and system libraries are required to support the iLO HighSecurity, FIPS, and CNSA security states.

To ensure the integrity of your download, HPE recommends verifying your results with
the following SHA-256 Checksum values:

b8f7d2fc16a82993ed7513ee230441645a43943b1ed0ba2bb376c01a92d91dd1	RPMS/x86_64/firmware-ilo5-2.12-1.1.x86_64_part2.compsig
eff13fb3fd5aeb77705726ce5c5f78e002253ba4a405f73bb4f60b41d40f7f4c	RPMS/x86_64/firmware-ilo5-2.12-1.1.x86_64_part1.compsig
ca2ad53b0911cda8d3d8827dd54c4ae5cd538d1075742c9629fc6a82f81a108b	RPMS/x86_64/firmware-ilo5-2.12-1.1.x86_64.rpm

Reboot Requirement:Reboot is not required after installation for updates to take effect and hardware stability to be maintained.

Installation:

To update to iLO 5 version 2.10 or later, you must have a minimum iLO 5 version of 1.40

To update firmware from Linux operating system on target server:

Install the RPM package
> rpm -Uvh <filename>.rpm

See where the files land
> rpm -qlp <filename>.rpm

Change to the directory you see in the previous step and run hpsetup by typing ‘./hpsetup’ at the command prompt.

Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.

Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired components to be updated in the directory, \packages on the USB key.
Update the firmware and software in the usual manner.

Enhancements

Added 2 new cmdlets

Set-HPiLOIPv6NetworkSetting – modifies the IPv6 network settings of the host server where the iLO is located.
Get-HPiLOServerInfo – gets the host server embedded health information from iLO.

Updated cmdlets parameters and properties

Set-HPiLOSharedNetworkPort — New parameter SNPPort for supporting iLO4 firmware v2.0+.
Set-HPiLONetworkSetting — New parameter iLONicAutoSelect for supporting iLO4 firmware v2.0+.
Find-HPiLO — New returned properties SerialNumber and UUID for more iLO information.
Get-HPiLOModuleVersion — Updated property UICulture to AvailableUICulture. Added properties CurrentUICultureName and CurrentUICultureVersion.

New language support
Other enhancements

Changed Write-Host to Write-Error for the errors that would terminate the cmdlet execution. Changed Write-Host to Write-Warning for warning messages. This allows an easier way for users to capture the warning and error output.
Added sample scripts which can be found in the directory where the HPiLOCmdlets package is unzipped. These sample scripts are for user reference for some common and some complex scenarios managing iLOs.
Enhanced parameter validation to check the correctness of input parameters before sending commands to iLO.
Support for Invoke-HPOAiLOCommand for interoperation of iLO and Onboard Administrator cmdlets. This feature will be useful when users cannot access iLO directly but are able to access the OA that manages the iLO.
Support for the Ccredential parameter for each cmdlet. This feature supports a new way to access the iLO by credential besides inputting iLO user name and password.
Enhanced pipeline processing to enable piping parameters to iLOCmlets in multiple ways.
- Piping a list of servers to an iLO cmdlet
- Piping an object or a list of objects to iLO cmdlets

Note: For the last 3 enhancements listed, please refer to for more information.

Installation Instructions

Prerequisites:

The HP ProLiant iLO 3/4 Channel Interface Driver for Windows X64 (version 3.4.0.0 or later) must be installed prior to this component.

To ensure the integrity of your download, HP recommends verifying your results with
this MD5 Checksum value:

540300f9f2d8b08a7fa6bafbbd55759a

cp022404.exe

Reboot Requirement:Reboot may be required after installation for updates to take effect and hardware stability to be maintained.

Installation:

Place the Smart Component in a temporary directory, then double-click it to run.

Select «Install» to start extracting to a temporary location on the hard drive.

Click the «Install» button to perform the service installation.

Important

Installation Instructions

Prerequisites:

This utility requires the following minimum firmware/configuration revisions:

HPE ProLiant or Integrity server with iLO 3, iLO 4 or iLO 5.
iLO 3 firmware v1.15 or later.

To ensure the integrity of your download, HPE recommends verifying your results with
this SHA-256 Checksum value:

188a52ab894d7cd6f4837ab12a4218eef319bb64be61fed757e092cb2339154a

Setup.exe

Reboot Requirement:Reboot is not required after installation for updates to take effect and hardware stability to be maintained.

Installation:

Download this SoftPaq onto your hard-drive. Execute it from within Windows.

Installation Instructions

To ensure the integrity of your download, HP recommends verifying your results with
this MD5 Checksum value:

289e042d6a5fcc5cb35fe90f0bbef819

hp-ilo-8.2.6-3.rhel4.i386.rpm

Installation:
Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.

If a previous version of the hpasm, hprsm or cmanic package is installed, it must be removed before this package can be installed. To remove the previous version and any packages dependent on it, type the following:

rpm -e hpasm hprsm cmanic

To install the package, type:

rpm -ivh hp-ilo-<version>.rpm

Note: This package will automatically attempt to rebuild itself if the installed Linux kernel is different than the kernel the hp-ilo device driver was compiled against.

Additional information and help is available by typing the following:

man hp-ilo

Availability

Important Notes:
None

Deliverable Name:
HP Lights-Out Online Configuration Utility for Windows 2003/2008 x64 Editions

Release Version and/or Date:
4.0.0.0

Last Recommended or Critical Version:
3.2.0.0

Previous Version of Firmware:
3.2.0.0

Upgrade Requirements:
Optional: Users should update to this firmware version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Optional upgradation for iLO 4 support.

Firmware Dependency:
This software works best with the following firmware revisions:

Integrated Lights-Out 2 firmware (any version)
Integrated Lights-Out 3 firmware (any version)
Integrated Lights-Out 4 firmware (any version)

Enhancements/New Features:

Added support for iLO 4.

Problems Fixed:

HPONCFG GUI may have failed to run with the Directory Services Administrator login.
HPONCFG GUI may have given an invalid error while Enabling VLAN without a VLAN ID.
LOM Object Distinguished Name might not be disabled when Extended Schema is enabled.
HPONCFG might not have given an option to change the User login.
HPONCFG GUI may have given a false error message when a null password is entered.
Capture configuration using /a /w switches may have given a ‘Feature Not Supported’ error.

Known Issues:

None

Revision History

Version:1.3.3 (28 Sep 2017)

Enhancements

Upgrade Requirement:Recommended — HPE recommends users update to this version at their earliest convenience.

Updated to support HPE Gen10 Servers.

Version:1.3.1 (11 Dec 2015)

Fixes

Upgrade Requirement:Recommended — HPE recommends users update to this version at their earliest convenience.

This release fixes the following issues:

The IRC does not work correctly in .NET 3.5 without SP1.
The IRC might stop working when a virtual media URL is too long.
The IRC freezes when you access a video file that is in use.

Enhancements

This release includes the following enhancements:

Support for TLS 1.1 and TLS 1.2.
Note: TLS 1.1 and TLS 1.2 require Windows 7 or later and .NET framework version 4.5 or later.
Enhanced security for communication between iLO and the IRC.
Japanese 101 keyboard support.
Improved the way that the IRC is closed due to an iLO reset or firmware update.
Improved handling of remote console sharing.

Version:1.2.3.0 (24 Jul 2014)

Fixes

Upgrade Requirement:Recommended — HP recommends users update to this version at their earliest convenience.

Session key is visible during Remote Console session initialization.
Customizing regional options can cause the application to stop working.
Application times out during video recording.
Startup and Pre-failure videos show no video in some instances.
Mounting a USB key that is labeled as “F:” drive causes the application to stop working.
High memory usage when virtual media runs for a long time.
Virtual media may disconnect unexpectedly.
Application occasionally stops working when the Share or Acquire dialog is closed.
The application becomes unresponsive after dismounting image file while server is rebooting.
Virtual USB key is not completely disconnected when the physical USB key is unplugged.
High CPU usage when local playback is paused.

Enhancements

Added support for .NET Framework v4.0 and v4.5.
Added support for Simplified Chinese.
Added Offline Mode to allow local video playback without connecting to iLO.
Added “Caps Lock” entry to the Keyboard menu to allow synchronizing the Caps Lock keys between the client and remote server.
Added the Server Name, iLO FQDN, Enclosure name, and Bay number to the application title bar.
Added support for IPv6. Note: IPv6 support requires iLO 3 v1.50, iLO 4 v1.20 or later.

Version:1.1.2.0 (7 Apr 2011)

Enhancements

Upgrade Requirement:Optional — Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

Initial release.

Fixes

Upgrade Requirement:Recommended — HPE recommends users update to this version at their earliest convenience.

For iLO 4 Firmware version 2.30 and onwards, it is a must to upgrade to HPQLOCFG v1.50.

For iLO 4 Firmware versions below 2.30, iLO 2 and iLO 3, it is recommended to upgrade to HPQLOCFG v1.50.

This version of HPQLOCFG supports iLO 4 firmware version 2.30 onwards when FIPS Mode or Enforce AES/3DES Encryption mode is enabled.

Fixes

Upgrade Requirement:Recommended — HPE recommends users update to this version at their earliest convenience.

Fixed the following issues:

Cmdlets were not taking strings or arrays as parameters when passed through the pipeline.
Updated parameter handling for array inputs. Before this change, multiple elements in the server IP array matched to one element in username or password parameter array. After this change, only one element in the server IP array matched to one element in username or password array.
Cmdlets were not executed successfully with Force parameter.
Uninstalling iLOCmdlets removed an environment variable, which caused HP OACmdlets to fail to execute.
Removed unused parameter of WebAgentIPAddress in Set-HPiLONetworkSetting.
Syntax error occurred when executing Add-HPILOSSORecord or Import-HPiLOSSHKey cmdlets.
Added the missing parameter of BootCustomName for Set-HPiLOOneTimeBootOrder, which was used on iLO4.
Modified the return data for more consistent and reasonable structure. Below cmdlets were updated:
- Get-HPiLOFirmwareInfo
- Get-HPiLOHealthSummary
- Get-HPiLOSSOSetting
- Get-HPiLOHostData
- Get-HPiLOOAInfo

Installation Instructions

Prerequisites:

This utility requires the following minimum firmware revisions:

Integrated Lights-Out 2 firmware v1.00 or later
Integrated Lights-Out 3 firmware v1.00 or later
Integrated Lights-Out 4 firmware v1.00 or later

The management interface driver must be installed on the server.

Microsoft .Net Framework 2.0 or later is required to launch HPONCFG GUI.

To ensure the integrity of your download, HPE recommends verifying your results with
this SHA-256 Checksum value:

6c1da5d5c3dfdb56cda83bc002884ac470bf0719bf40420a787989c9bd5cf7b4

cp028862.exe

Reboot Requirement:Reboot is not required after installation for updates to take effect and hardware stability to be maintained.

Installation:Place Component to a directory in a temporary directory on your hard drive. Double-click it to run.

Click on the install button to install the utlility on the server. This does not require a reboot.

The utility will be installed in the program files under the directory Hp\Hponcfg\

A shortcut for the graphical interface of the utility will be provided in «Start Menu > Programs > HP System Tools > HP Lights-Out Online Configuration Utility».

Installation Instructions

To ensure the integrity of your download, HP recommends verifying your results with
this MD5 Checksum value:

cf491df1785655081855e5c34ef80600

cp023068.exe

Reboot Requirement:Reboot is not required after installation for updates to take effect and hardware stability to be maintained.

Installation:

Install the firmware using one of these options:

Run the Component on the host to be updated.
The component will update the iLO 2 firmware and reset the iLO 2 processor.
Extract the firmware from the component. This will place the firmware image file, iLo2_yyy.bin (where yyy represents the firmware version) in the target directory. You now have these options:
- Login to iLO 2, navigate to the Update Firmware page, and update the firmware from there.
- Use the HP Lights-Out Configuration Utility, CPQLOCFG, and RIBCL/XML scripts to update iLO 2 across the network.
- Use the HP Online Lights-Out Configuration utility, HPONCFG, and RIBCL/XML scripts to update iLO 2 from the supported host OS.
- Use the Directory Migration Utility to perform network discovery of Lights-Out processors, import/export Management Processor information, and bulk firmware updates. It is not necessary to perform a directory migration to use this additional functionality. This Utility is contained in the HP Directories Support for Management Processors software, which is available on www.hp.com/go/ilo -> Support & Downloads -> Select a Microsoft Windows Operating System -> Software: Lights-Out Management.